Search Verilog UART, 300 result(s) found

AT91SAM7 Serial-IO/UART Example

Example application for the Atmel AT91SAM7S64 (should work with all AT91SAM after minimal changes) which demonstrates UART interfacing (serial I/O) in simple "polled" mode (no ISRs). Based on an example from Atmel but extended by some extra code. Build tested with the AT91SAM7S-E...

LPC2103 UART ( Universal Asynchronuous Receiver Transmitter)

This piece of  code sets up the necessary stuff for an Universal Asynchronuous Receiver Transmitter (UART) trough the designated pins, by writing the correct sets of ones and zeros to the necessary registers...

The implementation of Viterbi encoder and decoder VLSI

Application background Forward Error Correction techniques are utilized for correction of errors at the receiver end. It is well known that data transmissions over wireless channels are affected by attenuation, distortion interference and noise, which affect the receiver’s ability to receive...

Serial port transceiver protocols based on Verilog

Serial transceiver based on Verilog programs using combinational and sequential logic written, easy to modify!...

A FIR filter written in Verilog,

This code achieved a FIR filter, combined Matlab on data for for validation, last with modesim on prepared of code for simulation, eventually with MATLAB and FPGA achieved a function normal of FIR low pass filter, here with source code, and with Verilog code prepared, has is big of reference role fo...

CPU32_adder

introduce the Verilog language and use this to implement the calculation two 32-bit numbers including the multiplication.  In the codes, I input my CWID and 41411 to validate the function. you can change the HEX files to calculate different value. Architecture: Carry-Ripple+Carry-Skip....

CPU32_adder

introduce the Verilog language and use this to implement the calculation two 32-bit numbers including the multiplication.  In the codes, I input my CWID and 41411 to validate the function. you can change the HEX files to calculate different value. Architecture: Carry-Ripple+Carry-Skip....

CPU32_adder

introduce the Verilog language and use this to implement the calculation two 32-bit numbers including the multiplication.  In the codes, I input my CWID and 41411 to validate the function. you can change the HEX files to calculate different value. Architecture: Carry-Ripple+Carry-Skip....

STM32-based UART testing procedures

In the terminal running UART test program and PC through the super terminal to the serial port to send a character () at the end until the knock in the Enter key, through the serial port 0 is sent to the development board....

prev 1.. 6 7 8 9 10 11 12 13 14 ... 30 next
Sponsored links

LOGIN

Don't have an account? Register now
Need any help?
Mail to: support@codeforge.com

切换到中文版?

CodeForge Chinese Version
CodeForge English Version

Where are you going?

^_^"Oops ...

Sorry!This guy is mysterious, its blog hasn't been opened, try another, please!
OK

Warm tip!

CodeForge to FavoriteFavorite by Ctrl+D